Disconnect fuel lines and lay carefully to one side.
Pull out the injector together with the cartridge with pliers.
Make sure that dirt does not get into the injector.
Injector (6) installed with two O-rings (5) into the cartridge (4) for injector
When installing, it is necessary to lubricate the rubber o-rings on the injector and on the cartridge with oil to facilitate installation.
If the injector is inserted "dry", there is a danger that the rubber ring will crack and there will be no proper seal. This will lead to engine malfunctions due to the intake of additional air.
Damaged O-rings must be replaced.
Visitor comments