From the engine compartment, press the turn signal locking lever located next to the headlight housing backwards (arrow).
The position of the lever depends on the type of headlight installed.
- In a normal headlight it is located on the headlight housing.
- In the case of a "triple" headlight, the lever is located on the turn signal.
Press the locking tab of the turn signal light in the direction shown by the arrow slightly downwards and pull the turn signal light forward.
Remove the plug to remove the light completely, or press the bulb down, turn it to the left and pull it out.
Installation is performed in the reverse order of removal. First insert the lamp until the locking tab clicks into place and then press the locking lever back into its original position.
The original material is located on the website AudiManual