Execution order
1. Open the trunk lid.
2. Unscrew the fastening nuts and remove the lock with gaskets from the studs.
3. Disconnect the rod from the lock lever by pressing the spring holder.
4. Disconnect the holder from the trunk lid.
5. Disconnect the rod from the cylinder body lever.
6. Remove the decorative ring.
7. Unscrew the two mounting bolts and remove the lock switch housing with the cylinder.
8. To replace the lock cylinder, remove the pin, remove the washer and remove the cylinder with the key inserted, the cylinder body and the spring from the lock switch body.
9. Install the lock in reverse order.
10. Adjust the lock by moving the latch with the bolts loosened.
Content source: the specified website: audimanual