Transmission Service (Before August 1985) (Audi 100 C3)

Every 15,000 km of mileage it is necessary:

1. Check the tightness of the clutch hydraulic drive. If a brake fluid leak is detected, tighten the hose clamps and tube mounting nuts. If the hose has cracks, tears, or the rubber has lost its elasticity, replace the hose.

2. Check and adjust the free travel of the clutch pedal (mechanical drive).

3. Check the tightness of the gearbox. If oil is leaking through the gearbox housing connector, tighten the mounting bolts.

4. Check the oil level in the gearbox and top up if necessary.

5. Check the condition of the CV joint protective covers. Replace torn covers.

Every 45,000 km of mileage, perform all the work that should be done after 15,000 km of mileage, and, in addition, change the oil in the automatic transmission, as well as in the main gear housing.

[The full version is posted on the resource: audimanual]