Remove the soundproofing from under the engine/gearbox, if any.
Unscrew the oil check screw -arrow-. The oil level is correct when the gearbox is filled to the bottom of the oil fill hole. Screw in screw -arrow-. Screw in the oil filler screw. 30 Nm. When filling the crankcase after completely draining the oil, the following instructions must be observed: Unscrew bolt -arrow-. Fill with gear oil up to the lower edge of the oil filler hole. Screw in screw -arrow-. Start the engine, shift into gear and let the gearbox run for about 2 minutes. Switch off engine and remove screw -arrow-. Top up gear oil again up to the lower edge of the filler hole. Screw in screw -arrow-. Screw in the oil filler screw. 30 Nm.
Visitor comments