Order of execution
1. Open the hood and disconnect the wire from «negative» battery terminals.
2. Remove turn signal (cm. subsection 12.1.5.6).
3. Turn and remove the protective cap of the headlight housing, disconnect the blocks with wires from the lamp sockets.
4. Remove the headlight range control from the headlight housing without disconnecting the hoses or wires from it.
5. Loosen the four fixing screws (indicated by arrows) and remove headlight.
6. Install headlight in reverse order.
7. Adjust the headlight (cm. subsection 12.1.5.4).
Visitor comments