Car headlights
- 1 - headlight;
- 2 - direction indicator;
- 3 - fog light;
- 4 - decorative frame of the fog lamp
Headlight and direction indicator
- 1 - direction indicator lamp socket;
- 2 - direction indicator lamp;
- 3 - direction indicator;
- 4 - headlight;
- 5 - screw for adjusting the headlight in the vertical plane;
- 6 - headlight stand;
- 7 - screw;
- 8 - headlight mounting screw;
- 9 - screw for adjusting the headlight in the horizontal plane;
- 10 - headlight bulb socket;
- 11 - junction block
View of the headlight from the engine compartment: a) – protective cap removed; b) – the protective cap is installed
- 1 - connection block;
- 2 - screw for adjusting the headlight beam in the horizontal plane;
- 3 - lamp socket;
- 4 - spring chuck holder;
- 5 - screw for adjusting the headlights in a vertical position;
- 6 - protective cap
Replacement
1. Open the hood and disconnect the wire from the negative terminal of the battery.
2. Turn and remove the protective cap of the headlight housing.
3. Disconnect the wiring harness from the lamp socket.
4. Press down on the spring-loaded cartridge holder.
5. Remove the socket and replace the lamp, but do not touch the bulb with your hands. The halogen lamp can only be handled with clean gloves or a clean cloth.
6. Insert the cartridge and secure it with the holder.
7. Connect the wire connector to the lamp socket.
8. Install the protective cap of the headlight housing. The "Oben" mark on the cap should be on top.
[The article was copied from the website: AudiManual.ru]