A - Switch for high and low beam headlights
- Position 0 - outdoor lighting off
- Position 1 - parking lights (sidelights)
- Position 2 - low and high beam
Instrument lighting
When the lighting is on, the intensity of the backlighting of the instruments and the center console is stepwise adjusted by turning the knob.
B - Switch for direction indicators and dipped beam headlights
The direction indicators only work when the ignition is on.
Right turn - lever up.
Left turn - lever down. Simultaneously with the inclusion of the direction indicator, the counter lamp starts flashing. After the completion of the turn maneuver, the direction indicators automatically turn off.
The procedure for turning on direction indicators when changing lanes
To do this, lightly push the lever up or down and hold it in that position for a bit. The control lamp should flash.
Switching dipped beam headlights to dimensions and light signal
Dimensions - lever in the middle position. Dipped beam - lever up.
Light signal - press the lever against the steering wheel.
Parking lights
They only turn on when the key is pulled out of the ignition.
Parking lights on the right - lever up. Parking lights on the left - lever down.
Note: When switching the outdoor headlights, strictly follow the requirements of the traffic regulations.
Visitor comments