Table of contents: A - Hazard warning light switch ↓ B - Windscreen wiper and washer… ↓
A - Hazard warning light switch
The hazard warning lights are activated by lifting the lever upwards. At the same time, the control lamp starts flashing. The alarm also works when the ignition is off.
Note: When turning on the hazard warning lights, follow the requirements of the traffic regulations.
B - Windscreen wiper and washer switch
The windshield wipers and washer operate only when the ignition is on.
In frosty weather, before turning on the windshield wipers for the first time, check that they are not frozen to the glass!
One-time cleaning (not fixed position)
To do this, lightly press the lever to position 1 without locking and release it.
Intermittent cleaning
Set the lever to position 1. The windscreen wipers operate in intermittent mode with intervals of every 5 seconds.
Slow cleaning
Set the lever to position 2.
Quick cleaning
Set the lever to position 3.
Washing with simultaneous cleaning of glass
To turn on the washer while simultaneously operating the windshield wipers, lightly press the lever towards the steering wheel and release it.
When you return it to its original position, the washer stops working, and the windshield wipers will continue to work for about 4 more seconds.
If you turn on the low or high beam, the headlights will also be washed at the same time as the windshield.
At the same time, despite the presence of automation, try to mechanically remove accumulated and difficult to wash off dirt, insect residue, etc. from the glass at certain intervals, for example, during each refueling.