Withdrawal
1. Insert a long Phillips screwdriver through the side hole in the cross member (arrow illustration).
2. Turn the locking screw -1- for adjusting the turn signal by ¼ turn.
3. Press the screw with the bar down and remove the pointer -2- forward (in the direction of the arrow) from the body.
4. Unplug the connector.
Installation
1. Plug in the connector.
2. Insert the direction indicator with the strips -1- into the guides -2- of the headlight housing and move it back until the strip snaps into place distinctly.
3. Check that the direction indicator is secure by pulling the indicator forward. The lamp must not be removed.
4. Turn the screwdriver ¼ turn to the right to lock it in place.
Visitor comments