Removing the switch with lock for disconnecting the front passenger's Airbag -E224-
Turn on the ignition. Disconnect the battery ground cable with the ignition on. Remove the glove box. Disconnect el. connector -2-.
To do this, press the safety locks -1- in -the direction of the arrow- until the plug connector is unlocked. Disconnect plug connector -2-.
Unlock the spring clips -1- and -3- and press the -lock switch to disconnect the front passenger's Airbag from the lock switch housing.
Installation
Installation is in reverse order, taking into account that el. The connectors must be inserted all the way until they click into place. Please note that the wires should not be pinched. Please note that the switch with a lock for disconnecting the front passenger's Airbag -E224 must be locked into the housing until it clicks audibly. Before turning on the ignition, you must perform the following procedures: move the selector lever to position P. Activate the parking brake. Turn off the ignition. Open the hood. Connect a charger, for example, battery charger -VAS 5095A- to the points for starting from an external 12 V starter current source on the on-board network. Switch on the ignition. Connect the battery ground cable with the ignition on.
Visitor comments