1. Never disconnect the cooling circuits of the air conditioner unless the system has been discharged by an Audi dealer or a qualified person.
2. If the compressor or condenser makes other mechanical work difficult, such as removing the engine, it is permissible to unscrew their fasteners and move them without disconnecting the hoses. If there is still not enough room to do the required work, the system must be unloaded before disconnecting and removing assemblies.
3. The system must be recharged before installation.
4. Regularly check the condition of the capacitor. Clean it with water or compressed air.
5. Check the condition of the drive belt, if necessary, adjust the belt tension as described in Chapter 29.
Visitor comments