Execution order
1. Drain the oil from the engine crankcase.
2. Remove the pan covering the gearbox.
3. Place a jack under the front suspension beam.
4. Loosen the front bolts securing the front suspension beam and lower it slightly with a jack.
5. Loosen the mounting bolts and remove the crankcase.
6. Install the crankcase in the reverse order. In this case, replace the crankcase gasket and install it without using sealant. Tighten the crankcase mounting bolts evenly to a torque of 20 N·m (2.0 kgf·m).