Features of the wiring diagram of AUDI cars «100» with engine «DR» 1984
Designation | Name | Position |
A | Accumulator battery | 2 |
IN | Starter | 4-7 |
WITH | Generator | 9 |
C1 | Voltage regulator | 10 |
D | ignition switch | 41 |
F1 | Oil pressure sensor calibrated at 1.8 kg/cm2 | 24 |
F4 | Reversing light switch | 37 |
F9 | Parking brake warning light switch | 39 |
F22 | Oil pressure sensor, 0.3 kg/cm calibrated2 | 26 |
F62 | Vacuum switch of the indicator of the included transfer | 30 |
F66 | Low coolant level sensor | 34 |
F68 | The sensor of the included gear shift indicator | 21 |
F76 | Electronic thermal switch | 33, 34 |
G5 | Tachometer | 19 |
G40 | Hall sensor ignition distributor | 12-14 |
J81 | The relay of inclusion of heating of the inlet pipeline | 32, 33 |
J98 | Gearshift indicator control unit | 20-30 |
J114 | Oil pressure warning light control unit | 24-28 |
J118 | The relay of inclusion of a control lamp of wear of brake pads | 38, 39 |
K2 | Battery discharge warning lamp | 29 |
KZ | Oil pressure warning lamp | 27 |
K14 | Parking brake and brake lining wear indicator | 40 |
K28 | Control lamp of emergency temperature of a cooling liquid | 35 |
K48 | Control lamp of the index of a gear change | 26 |
N | Ignition coil | 16-19 |
N1 | Heating element of automatic carburetor starter | 34 |
N3 | Air stop valve | 36 |
N13 | Brake lining wear sensor for left wheel brakes (circuit breaker) | 38 |
N41 | Hall sensor ignition distributor | 11-14 |
N51 | Intake pipe heating resistor | 32 |
ABOUT | Ignition distributor | 15-19 |
R | spark plug tips | 15-19 |
Q | Spark plug | 15-19 |
S12 | Fuse on the mounting block | |
T1 | Single plug connector (on the right in the power unit compartment) | |
T1a | Single plug connector (behind the instrument cluster) | |
Tib | Single plug connector (behind the instrument cluster) | |
T2 | 2-pin connector (behind the instrument cluster) | |
T2a | 2-pin connector (behind the instrument cluster) | |
T4 | 4-pin connector (behind the instrument cluster) | |
T4a | 4-pin connector (green, behind instrument cluster) | |
Ground connections | ||
1 | Jumper to ground battery - body | |
7 | Jumper to ground between alternator and engine | |
8 | Ground connection behind instrument cluster | |
Relay placement | ||
[3] | Gearshift indicator control unit on mounting block | |
[10] | The relay of inclusion of heating of the inlet pipeline (on the mounting block) | |
[1] | The relay of inclusion of a control lamp of wear of brake overlays (on the relay box) | |
[6] | Oil pressure sensor control unit (on the relay box) |
Visitor comments