Disconnect the negative wire from the battery.
Remove the noise-proof plastic in the lower part of the engine compartment by loosening the quick-release fasteners.
Raise and support the vehicle on the side where the starter is located.
Disconnect the wires on the back of the starter from the traction relay. Unscrew the nuts and bolt of the protective plate, unscrew the bolts (1, 2 and 4), connecting the starter to the engine and gearbox in accordance with the method of fastening the starter.
Take out the starter (3).
The starter is installed in the reverse order of removal. Connect the wires securely so that they do not loosen.
Visitor comments