Clutch device (Audi 100 C3)

The vehicles are equipped with a dry single-plate clutch with a central pressure diaphragm spring. Vehicles with gearboxes of types 013, 014 II and 093 are equipped with a mechanical cable drive for disengaging the clutch, and vehicles with gearboxes of type 016 are equipped with a hydraulic drive.

Clutch with mechanical drive

• 1 - slave disk;
• 2 - pressure plate assembly;
• 3 - bushing;
• 4 - bolt;
• 5 - clutch release bearing;
• 6 - guide bushing;
• 7 - clutch release fork lever;
• 8 - bolt;
• 9 - return spring;
• 10 - clutch release fork;
• 11 - adjusting sleeve;
• 12 - lock nut;
• 13 - cable sheath;
• 14 - clutch pedal;
• 15 - spring retainer

Hydraulically operated clutch

• 1 - locking pin;
• 2 - pusher;
• 3 - retaining ring;
• 4 - mudguard;
• 5 - piston;
• 6 - working cylinder cuff;
• 7 - spring;
• 8 - bleed valve;
• 9 - protective cap;
• 10 - working cylinder body;
• 11 - nipple;
• 12 - hose;
• 13 - coupling sleeve;
• 14 - tube;
• 15 - bolt;
• 16 - cylinder body;
• 17 - return spring;
• 18, 21 - cuffs;
• 19 - bypass ring;
• 20 - piston;
• 22 - locking bracket;
• 23 - retaining ring;
• 24 - pusher;
• 25 - mudguard;
• 26 - lock nut;
• 27 - Pusher fork;
• 28 - finger;
• 29 - retaining ring;
• 30 - nipple;
• 31 - working fluid supply pipe;
• 32 - tank;
• 33 - return spring;
• 34 - clutch pedal;
• 35 - guide bushing;
• 36 - clutch release fork;
• 37 - clutch release bearing;
• 38 - bolt;
• 39 - pressure plate assembly;
• 40 - driven disk;

(The original version is on the portal: AudiManual)