Air filter
- 1 - warm air intake shield;
- 2 - clamp;
- 3 - warm air supply hose;
- 4 - spring clip;
- 5 - vacuum hose of the thermostat valve;
- 6 - thermostat flap;
- 7 - pneumatic damper drive;
- 8 - cold air supply hose;
- 9 - thermostat;
- 10 - filter cover clamp;
- 11 - filter housing;
- 12 - filter element;
- 13 - filter cover;
- 14 - thermostat valve;
- 15 - gasket;
- 16 - crankcase ventilation hose;
- 17 - vacuum hose from carburetor to thermostat valve
Execution order
1. Unfasten the clamps or, if present, unscrew the two screws securing the cover.
2. Remove the cover.
3. Remove the filter element.
4. Plug the hole in the carburetor with a clean rag. Wipe the inside of the filter housing and cover. Remove the rag from the hole.
5. Insert a new filter element.
6. Install the lid. Fasten the clamps.