Screen markings for adjusting fog lights
Execution order
1. Mark the screen in a certain way, with the line of the headlight centers M drawn on the screen at a distance h equal to the height of the fog lamp centers above the floor. The distance h must be measured on a loaded vehicle with an additional mass of 70 kg, in the middle of the rear seat. The fuel tank must be full.
2. The distance X from the center of the headlight to the center of the car is measured on the car.
3. Check and, if necessary, adjust the tire pressure to the standard.
4. Place the car on a horizontal platform perpendicular to the screen at a distance of 10 m. In this case, the longitudinal plane of symmetry of the car should pass along line 0 on the screen.
5. Turn on the fog lights.
6. Adjust the direction of the light spot for each fog lamp separately. Cover the other lamp with an opaque material during adjustment (or put on a protective cap).
7. Turn the adjusting screw to set the headlights so that the center of the light beam is at the intersection of lines N and A (B) (fog lights are height adjustable only).
[The article was copied from the website: AUDIMANUAL.ru]