Wiper blades
1. Lift the wiper blade and arm off the windshield.
2. Press the plastic clip, remove the brush from the end of the arm (photo).
![](https://www.audimanual.ru/img/100/0904.jpg)
3. Insert a new brush, make sure that the plastic bracket clicks into place.
Wiper arms
4. Remove the trim button from the top of the hand with a lever (photo).
![](https://www.audimanual.ru/img/100/0905.jpg)
5. Unscrew the nut securing the lever to the spindle (photo).
![](https://www.audimanual.ru/img/100/0906.jpg)
6. Insert a pin or bolt into the hole on the edge of the lever to secure it in the closed position (photo).
![](https://www.audimanual.ru/img/100/0907.jpg)
7. Carefully remove the wiper arm.
8. Installation is carried out in the reverse order. Position the arm so that the blade is parallel and approximately 20mm below the black windshield frame when the wipers are secured.
Visitor comments