Table of contents: Oil drive. pump and fuel injection… ↓ Balance shaft ↓
Oil drive. pump and fuel injection pump
1. Oil drive. pump and fuel injection pump.
2. Bolt: replace; 30 Nm + turn further by +45°.
3. Oil sprocket. pump; mounting position: the side with the inscription faces the engine.
4. Pressure spring.
5. Crankshaft: with toothed wheel of oil drive chain. pump and fuel injection pump.
6. Fuel injection pump sprocket; mounting position: the side with the inscription is visible from below.
7. Dampener bar.
8. Guide bolt of the damper: replace; 5 Nm + turn further by 90°.
9. Chain tensioner: with a tensioner bar.
10. Bolt: replace; 5 Nm + turn further by 90°.
Balance shaft
1. Bolt: Insert with threaded varnish; 9 Nm.
2. Support body.
3. Bolt: 23 Nm.
4. Bolt: 60 Nm; when loosening and tightening, use the "3359" fuel pump locking tool as a counter-key.
5. Sprocket for balance shaft.
6. Balancing weight: CP side.
7. Roller bearing.
8. Balance shaft.
9. Bolt: 60 Nm; when loosening and tightening, use the "3359" fuel pump locking tool as a counter-key.
10. Balancing weight: belt pulley side.
11. Roller bearing.