Pipes and hoses, vehicles with 4-cylinder diesel engines, vehicles with and without dynamic steering system (Audi A4 B8)

Pipes and hoses, vehicles with 4-cyl. diesel, vehicles with and without systems. dynamic steering

1. Tank bracket on the body.
2. Tank in bracket.
3. Bracket bolt.
4. Return hose clamp on the side member and suction hose clamp on the pressure pipe.
5. Radiator hydraulic fluid to the condenser.
6. Vane pump in bracket.
7. Pressure main on the crosspiece of the guy wires.
8. Installation position of the pressure line connection.
9. Pressure line on the engine bracket.
10. Return line on the subframe, return line bracket on the side member.

Tank bracket on the body

Bracket "1" is secured to the body with bolts "2". Secure reservoir "4" with bolt "3" to bracket "2".

Tank in bracket

Install the tank with the protrusion "1" into the recess on the bracket "2".

Return hose clamp on the side member

Secure the return hose "1" with the clamp "2" to the left side member.

Suction hose in the pressure tube clamp

Insert the suction hose "1" into the clamp "2" of the pressure pipe "3".

Hydraulic radiator, liquid to condenser

Install the hydraulic fluid radiator "1" onto the brackets "2", then secure it in the fasteners "3".

Pressure main on the crosspiece of the guy wires

Screw the pressure line using nut "3" and rubber support "4" onto the cross connection of the stretchers. When tightening the connection of the main line, take into account the installation. position of the highway. Markers "1" and "2" should be located opposite each other.

Pressure line on the engine bracket

Lay the pressure line "4" between the connecting element "2" and the engine bracket "3". Screw the mounting bracket "5" with the nut "6" onto the threaded pin "1".