1. Bandage.
2. Expansion tank: take into account installation. position.
3. Locking cap with measuring probe.
4/5. Bolt: 9 Nm.
6. Spring clamp: Remove and install with hose clamp pliers.
7. Engine bracket connecting element.
8. Bolt: 9 Nm.
9. Mounting bracket.
10. Nut: 9 Nm.
11. Sealing ring: replace when removed.
12. Pressure line: from the vane pump to the steering gear with hydraulic unit. Insert the pressure line all the way during installation.
13. Clamp.
14. Bolt: 9 Nm.
15. Return hose: from hydraulic oil cooler to expansion tank. tank; observe the installation position on the tank; observe the installation position on the hydraulic oil cooler.
16. Clamp: tighten with clamp pliers; replace when removed.
17. Return line: from the steering gear with hydraulic unit to the reservoir. Insert the return line all the way during installation.
18. Power steering.
19. Sealing ring: replace when removed.
20. Bolt: 20 Nm.
21. Rubber cushion: 9 Nm.
22. Pressure line: from the vane pump to the steering gear with hydraulic unit. Insert the pressure line all the way during installation.
23. Union nut: 40 Nm.
24. Nut: 6 Nm.
25. Bolt: 25 Nm.
26. Vane pump: fill with hydraulic fluid before installation. with oil.
21. Bolt: 25 Nm.
28. Clamp: tighten with clamp pliers; replace when removed.
29. Suction hose: observe the installation position on the tank; comply with mont. position on the vane pump.
[The original version of the article is posted on the website «audimanual»]