Vehicles with a 6-cylinder diesel engine, vehicles with a dynamic steering system
1. Bandage.
2. Expansion tank: take into account installation. position.
3. Locking cap with measuring probe.
4/5. Bolt: 9 Nm.
6. Spring clamp: Remove and install with hose clamp pliers.
7. Return hose: from hydraulic oil cooler to expansion tank. tank; observe the installation position on the tank; observe the installation position on the hydraulic oil cooler.
8. Clamp.
9. Clamp: tighten with clamp pliers; replace when removed.
10. Bolt: 9 Nm.
11. Sealing ring: replace when removed.
12. Return line: from the power steering mechanism to the hydraulic oil cooler. Fully insert the return line during installation.
13. Hydraulic oil cooler: fixed to the condenser with a clip.
14. Power steering.
15. Pressure line: from the vane pump to the steering gear with hydraulic unit. Insert the pressure line all the way during installation.
16. Rubber cushion: 6 Nm.
17. Nut: 6 Nm.
18. Bolt: 20 Nm.
19. Union nut: 40 Nm.
20. Pressure line: from the vane pump to the steering gear with hydraulic unit. Insert the pressure line all the way during installation.
21. Return line: from the power steering mechanism to the hydraulic oil radiator; observe the installation position on the hydraulic oil cooler. Insert the return line completely during installation.
22. Nut: 9 Nm.
23. Bolt: 25 Nm.
24. Vane pump: fill with hydraulic fluid before installation. with oil.
25. Bolt: 25 Nm.
26. Suction hose: observe the installation position on the tank; comply with mont. position on the vane pump.