Vane pump — vehicles with a 4-cylinder TFSI engine, vehicles without dynamic steering system (Audi A4 B8)

1. Bandage: fastening to the body.
2. Expansion tank: take into account installation. position.
3. Locking cap with measuring probe.
4/5. Bolt: 9 Nm.
6. Spring clamp: Remove and install with hose clamp pliers.
7. Bolt: 9 Nm.
8. Return line: from the steering gear with hydraulic unit to the reservoir; observe the installation position on the tank. Insert the return line completely during installation.
9. Sealing ring: replace when removed.
10. Power steering.
11. Bolt: 20 Nm.
12. Rubber cushion: 6 Nm.
13. Pressure line: from the vane pump to the steering gear with hydraulic unit. Insert the pressure line all the way during installation.
14. Nut: 6 Nm.
15. Union nut: 40 Nm.
16. Pressure line: from the vane pump to the steering gear with hydraulic unit. Insert the pressure line all the way during installation.
17. Nut: 9 Nm.
18. Mounting bracket.
19. Engine bracket connecting element.
20. Bolt: 9 Nm.
21. Bolt: 25 Nm.
22. Vane pump: fill with hydraulic fluid before installation. with oil.
23. Bolt: 25 Nm.
24. Clamp: tighten with clamp pliers; replace when removed.
25. Suction hose: observe the installation position on the tank; comply with mont. position on the vane pump.