Vehicles with a 6-cylinder FSI engine, vehicles with dynamic steering system
1. Bandage.
2. Expansion tank: take into account installation. position.
3. Oil cap with dipstick: checking the oil level.
4/5. Bolt: 9 Nm.
6. Spring clamp: Remove and install with hose clamp pliers.
7. Return hose: from hydraulic oil cooler to expansion tank. tank; observe the installation position on the tank; observe the installation position on the hydraulic oil cooler.
8. Nut: 6 Nm.
9. Clamp.
10. Return line: from the power steering mechanism to the hydraulic oil radiator; observe the installation position on the tank; observe the installation position on the hydraulic oil cooler.
11. Clamp: tighten with clamp pliers; replace when removed.
12/13. Bolt: 9 Nm.
14. Sealing ring: replace when removed.
15. Return line: from the power steering mechanism to the hydraulic oil cooler. Fully insert the return line during installation.
16. Hydraulic oil cooler: fixed to the condenser with a clip.
17. Power steering.
18. Bolt: 20 Nm.
19. Pressure line: from the vane pump to the steering gear with hydraulic unit. Insert the pressure line all the way during installation.
20. Rubber cushion: 6 Nm.
21. Nut: 6 Nm.
22. Union nut: 40 Nm.
23. Pressure line: from the vane pump to the steering gear with hydraulic unit. Insert the pressure line all the way during installation.
24. Nut: 9 Nm.
25. Mounting bracket.
26. The engine bracket connecting element is replaced together with the assembly; fill the hydraulic fluid before installation. with oil.
27. Bolt: 20 Nm.
28. Hydraulic pump, syst; steering wheel "V119" with vane pump control valve -(V119)-; the pump and the control valve are one.
29. Bolt: 20 Nm.
30. Suction hose: observe the installation position on the tank; comply with mont. position on the vane pump.
[The original version is on the portal: audimanual]