Table of contents: Safety beam ↓ Removal and installation of safety… ↓ Removal and installation the safety… ↓ Removal and installation of safety… ↓
Safety beam
1. Washer.
2. Bolt: 57 Nm.
3. Bolt.
4. Safety bar mount, left: for vehicles without a towing hitch.
5. Washer.
6. Bolt: 57 Nm.
7. Nut: 17 Nm.
8. Safety bar mount, right: for vehicles without a towing hitch.
9. Bolt: 57 Nm.
10. Washer.
11. Nut: 17 Nm.
12. Safety bar: for vehicles without a towing hitch.
13. Bolt.
14. Bolt. 57 Nm.
15. Washer.
16. Safety bar: for vehicles with a towing hitch.
17. Nameplate with identification data.
Removal and installation of safety beam. - a vehicle without a towing hitch
Remove the rear trim. bumper. Disconnect the plug connector of the radio clock receiver "J489". When replacing the safety bar. "3" it is necessary to remove the radio clock receiver "J489". Unscrew the bolts "1", holding the nuts "2". Remove the amplifier "3".
Installation in reverse order, install the rear trim. bumpers.
Removal and installation the safety bar mount. - a vehicle without a towing hitch
Remove the rear trim. bumpers. Remove the safety bar. Remove the eyes. Turn the side trim of the trunk on the left and right towards the rear. parts. Unscrew the "arrow" bolts and remove the "1" safety bar fastening.
Installation
Installation in reverse order. Install the left and right trunk trim. Install the lugs. Install the safety bar. Install the rear trim. bumpers.
Removal and installation of safety beam. - a vehicle with a towing hitch
Remove the rear trim. bumper. Remove the socket for the towing hitch. Remove the "1" wire tie. Use a soap solution to facilitate removal. Disconnect (if available) radio clock receiver plug connector "J489" "pos. 2". When replacing the safety bar. "3" it is necessary to remove the radio clock receiver "J489". Remove the lugs. Turn the side trim of the trunk on the left and right towards the rear. parts. Unscrew the "arrow" bolts and remove the safety bar. "3".
Installation
Installation in reverse order. Install the left and right trunk trim. Install the lugs. Install a socket for the towing hitch. Install rear trim. bumpers.
(The original article is available on the online resource: audimanual.ru)