Table of contents: Air filter ↓ Removal and installation the air… ↓
Air filter
1. Air duct: clean from salt deposits, dirt and leaves.
2. Sealing element.
3. Rubber tip of the air housing. filter.
4. Air housing. filter: clear from salts. sediment, dirt and leaves.
5. Replaceable air element. filter: Use only the original filter element.
6. Cover: air housing. filters: clean from salt deposits and dirt.
7. Air flow meter housing "G70".
8. Bolt: 3.5 Nm.
9. Air flow meter "G70": with seal.
10. Air guide tube.
11. Air duct: clean from salt deposits, dirt and leaves.
12. Bolt: 1.5 Nm.
Removal and installation the air liner. filter
Remove the air guide pipe by loosening the "arrow" clamps.
Unlock lock "1", turn the air intake housing cover. filter counterclockwise "arrow A" and remove. Remove the filter element.
Install
Installation in reverse order. To ensure proper operation of the G70 air flow meter, it is essential to follow the following instructions and operating procedures. Clean the air duct housing. filters from residual salts, dirt and leaves. Blow out the "arrow" drain on the air intake housing with compressed air. filter. Check the air duct from the radiator frame to the air intake housing for dirt and leaves. filter.
When installing the air liner. filter, align it in the center of the mount in the air housing. filter. Carefully place the cover on the air filter housing. filter without applying any force. Turn the cover clockwise "arrow B" until the retainer "1" engages. Ensure reliable connection of the air duct hose to the air housing. filter.