1 - connector. To disconnect, pull the wire clip
2 - potentiometer. For on-board computer flow indicator
3 - sealing ring
4 - air quantity meter
5 - plug for the adjusting screw of the CO installation
6 - gasket
7 — the top part of the air filter
8 - air filter element
9 - bolt, 20 Nm
10 — the lower part of the air filter
11 - connecting hose
12 - air intake pipe
13 - heated air hose
14 - cap
The air filter element should be changed every 30,000 km. If dusty, change more often.
Withdrawal
Pull out the air filter.
Open the clips on the filter housing.
Raise the top of the air filter.
Pull on the filter element slightly, release it from the lower part of the housing and pull it out to the side.
Wipe the filter housing with a cloth.
Knock out the element with the dirty side down. Replace the oiled element.
Attention: Do not clean the filter with either gasoline or oil.
Installation
Insert the new element from the side into the housing with the red stiffener upwards. Firmly press on the reinforcing bar.
Install the upper part of the filter and secure with clips.
Attach air filter.
Visitor comments