Toothed belt (CAPA)
1. Front timing belt cover: Install at the bottom and fix at the side.
2. Nut: 70 Nm.
3. Damper.
4. Bolt: 23 Nm.
5. Toothed pulley of the fuel injection pump; remove using the puller "T40064".
6. Timing belt tension roller.
7. Bolt: 9 Nm.
8. Rear timing belt cover.
9. Drive gear of the toothed belt.
10. Bolt: 75 Nm; for unscrewing and tightening use counter support "3036".
11. Fuel injection pump drive toothed belt: before removing, mark the direction of travel with chalk or a felt-tip pen - changing the direction of travel of a previously used toothed belt may lead to damage; check the degree of wear.