Rear final drive marking 0BD (Audi A4 B8)

The rear final drive 0BD corresponds to the following gearboxes: 6-speed manual transmission 0B2, all-wheel drive, 6-speed manual transmission 0B4, all-wheel drive, 7-speed manual transmission with dual-disc clutch 0B5 for all-wheel drive vehicles, automatic transmission 0B6, vehicles with all-wheel drive.

Location on the main. rear gear

Main gear 0BD, letter designation and production date "arrow".

• "Arrow A". Main gear 0BD with part number (example: 0BD 500 043A)
• "Strelka B." Letter designation "JTN"
• "Strelka S". Design data of the rear. head of transmission

If there is a replacement of the chapter. rear gear, then it is necessary to take into account not only the letter designation of the main gear. transmission, but also the PR number and engine code are mandatory. This is the only way to ensure a flawless connection.

Letter designationsI Letter designation

Letter designation	JTN	KBU
Flange diameter of the cardan shafts	70.7 mm	70.7 mm
Filling volume	1.0 l

Checking the oil in the rear. main transmission

Unscrew the threaded plug of hole "1" to check the oil. The oil level is sufficient if the crankcase is rear. the transmission main is filled to the lower edge of the oil filler hole.



Screw the threaded plug "arrow" back in and tighten it. Tightening torque: 45 Nm.

The original version is on the portal: audimanual