The cardan shaft inserted from the gearbox side
1. KP.
2. Hose clamp: replace.
3. Cardan shaft.
4. Sealing plate.
5. Bolt: main gear 0BF: M8 x 45. self-locking, replace, threaded holes in the flange shaft at the rear. the main transmission should be cleaned of any remaining fixing agent; cleaning can be done with a tap.
6. Gasket: replace damaged (bent) sealing ring; the seal whose rubber coating is coming off must be replaced; degrease the shaft with the flange and fit the gasket; the different colors of the sides do not matter during installation.
7. Rear final drive.
8. Intermediate support.
9. Bolt: 20 Nm.
Rear cardan shaft. main gear 0BF - torque and sequence, tightening
Always replace propeller shaft bolts "1". To prevent rotation, hold them using support "T10172" and adapters "T10172/5" (M8 bolts) or "T10172/6" (M10 bolts). Tighten bolts "1" in 3 stages.