2. Loosen the bolt (3 in the illustration) on the bracket, press the connector (2) in the direction of the arrows and separate the brake light D/W.
6.2. Brake light D/W connector
3. Turn the brake lights D/W (1 in the illustration) counterclockwise and remove it.
6.3. Removing the D/W brake lights
4. Using the T40024 device (see illustration 10.6 Chapter 6) separate the brake pedal from the brake booster.
5. Remove the retainer on the right side, pull the axle out of the brake pedal and remove the pedal.
6. Installation is performed in the reverse order of dismantling the components. Before installing the D/W brake lights, screw in the mounting bolt by hand and tighten it only after the clamps are engaged.
The article was copied from the website audimanual.ru