9.1. Vacuum pump installation details 1. Pressure sensor; 2. Vacuum booster; 3. Vacuum booster relay; 4. Vacuum pump; 5. Vacuum hose; 6. Non-return hose; 7. Vacuum hose to the engine
2. Remove the trim panel, disconnect the connector (2 in the illustration) and separate the vacuum hose (1) from the pump.
9.2. Electrical wiring connector and vacuum pump hose
3. Press the bracket with your hand (see illustration) and remove the vacuum pump in an upward direction.
9.3. Vacuum pump retainer
[This publication is borrowed from the resource: AUDIMANUAL]