Removal and installation the servomotor for adjusting the headlight angle (Audi A4 B6)

1. To dismantle the servomotor, perform all working operations up to and including the 4th, as when replacing the parking light bulb. You should be guided by the same drawings.

2. Remove the high beam compartment cover from the headlight housing.

3. Release the servomotor for adjusting the headlight tilt from the stopper. On the right headlight, you need to rotate it counterclockwise (arrow), on the left - clockwise.



4. In a headlight with a gas discharge lamp, the servomotor for adjusting the headlight tilt is unlocked in the same way: on the right headlight, you need to rotate it counterclockwise (arrow), on the left - clockwise.



5. For both types of headlights, tilt the servomotor and slide the servo shaft ball head downwards from the support.

6. Disconnect the plug connection.

7. The servomotor is installed in the reverse order. After dismantling, installing or replacing the servomotor, adjust the headlight angle.

(The article is a reprint of material from: Audimanual.ru)