Cover 1 at the left headlight
2. Remove connectors 1 and 2 from the holder. Loosen the holder and remove it upwards.
Connectors 1 and 2 on the left headlight
3. In order to dismantle the lamp of the right headlight, remove cover 1 on the right in the engine compartment (if it exists).
Cover 1 at the right headlight
4. Remove the screws (arrows). Detach the solenoid valve for the activated charcoal tank from the air duct (N80). Remove air duct 2.
Air duct 2 at the right headlight. 1 - solenoid valve for the activated carbon tank
5. Both on the right and on the left headlight, remove the high beam cover from the headlight housing. Release from stopper (only for halogen headlights) servomotor for adjusting the angle of the headlight. On the right headlight, you need to rotate counterclockwise, and on the left - clockwise. The engine does not need to be removed.
Servo motor on halogen headlight
6. remove the cartridge from the body (arrow). Remove the parking light bulb from the socket.
parking light bulb holder
7. Installation is carried out in the reverse order. When inserting a new lamp into the socket, do not touch the bulb with bare hands.
8. In the case of a halogen headlight, fix the servomotor with a stopper.
9. Close the cover and secure it with a spring wire clip.
Visitor comments