Withdrawal
1. Chock the rear wheels, apply the handbrake and raise the front of the vehicle. Then put the safety supports (see Jacking up the vehicle and installing jack stands). Remove the corresponding wheel.
2. The locker is fastened with collapsible plastic rivets and screws. Rivets can be removed. To do this, press out the central pin and remove the rivet body.
3. If provided, remove the screws securing the poker.
4. Lower the poker and take it out of the car arch
Installation
5. Installation is the reverse procedure. Replace broken fasteners. To install split rivets, first insert the body of the rivet, then press the center pin into the rivet flush with the rivet.
Visitor comments