2. Guided Chapter 3, paragraph 2, disconnect the negative battery cable.
3. Loosen the bolts of the axis of rotation and adjustment of the generator, turn the generator towards the engine (photo). To access the alternator on 5-cylinder engines, remove the plastic cover in front of the radiator and the mudguard from under the engine.
4. Remove the drive belt from the alternator pulley (photo).
5. Note the location of the electrical wiring on the back of the generator, then disconnect them (photo). Where necessary, release the cables from the brackets (photo).
6. Remove bolts of an axis of turn and adjustments, disconnect the generator from the engine. On 4-cylinder engines, if desired, an adjusting link can be unscrewed from the cylinder head (photo). Note also that it may be necessary to remove the plug from the actuator cover to gain access to the pivot bolt.
7. If necessary, you can unscrew the mounting brackets, and on 4-cylinder engines, remove the rubber bushings. When installing the suspension on 5-cylinder engines, you must first tighten the short bolt.
8. Installation is in reverse order, adjust the drive belt as described in Chapter 6.
Visitor comments