1. The battery is located in the engine compartment on the left side, just behind the bulkhead. On some models, it may be equipped with a protective coating.
2. Before disconnecting the wiring from the battery, check if the radio has a security code.
3. Where used, disconnect the valve pipe (photo).
4. Loosen the bolt of the negative (-) clamp and disconnect the wiring Remove the wiring from the battery.
5. Loosen the bolt of the positive (+) clamp and disconnect the wiring (photo) Disconnect the wiring from the battery.
6. Unscrew the bolt, remove the battery clip (photo).
7. Lift the battery off the platform, being careful not to spill any electrolyte.
8. Installation is carried out in the reverse order. Make sure the battery is properly oriented and the wiring is connected to the correct clamps. connect negative (-) clamp last, do not overtighten the clamp bolts. The curved side of the holding clip should touch the base of the battery.
Visitor comments