Lip seal and seal. flange on the side of the poly V-belt pulley
1. Bolt.
2. Sealing the crankshaft shaft on the side of the resolved pulley.
3. Oil radiator temperature regulator.
4. Bolt.
5. Oil radiator thermostat cover.
6. Sealing ring: replace.
7. Sealing flange: belt pulley side. Various configuration options. Sealing execution. flange refers to the seal design (with or without metal beams).
8. Sealing ring: replace.
9. Oil temperature sensor 2 "G664".
10. Bolt: 9 Nm.
11. Bracket of oil temperature sensor 2 "G664".
12. Sealing ring: replace.
13. Lid.
14. Bolt: 9 Nm.
15. Gasket: replace. Various assembly options. Sealing execution. flange refers to the seal design (with or without metal beams).
16. Mounting pins: 2 pcs.
17. Gasket: replace; the design depends on the configuration: with or without metal beams.
Sealing flange on the pulley side - torque and tightening sequence
Replace bolts that were tightened with additional tightening. Risk of damage to aluminum bolts when installing seals. flange. When installing the seal. aluminum bolts cannot be used for the cylinder block flange. Therefore, for tightening, a seal is needed. prepare 3 steel bolts M6x20 for the flange, as described below. Tighten the bolts in 10 steps in the sequence shown.
Stage 1...3
| Step | Screws | Tightening torque |
| 1 | Install the flange with seal on the cylinder block | |
| 2 | "1" | Tighten for guide roller |
| 3 | "2, 3, 4" | Tighten steel bolts M6x20 to a torque of 9 Nm |
Stage 4...8
| Step | Screws | Tightening torque/rotation angle |
| 4 | Install the oil temperature regulator. radiator with cover | |
| 5 | "10" | Screw it in by hand until it stops |
| 6 | "1...19" | 3 Nm |
| 7 | "1...19" | 3 Nm - these measures also take into account the fit of the seal. flange |
| 8 | "1...19" | Turn 90° further |
Stage 9...11
| Step | Screws | Tightening torque/rotation angle |
| 9 | "2, 3, 4" | Unscrew the steel bolts M6x20 |
| 10 | "2, 3, 4" | Install the aluminum bolts and tighten to 3 Nm |
| 11 | "2, 3, 4" | Turn the aluminum bolts 90° |