Turn signal in the outside mirror
1. Mirror.
2. Mounting the mirror position regulator.
3. Outside mirror housing.
4. Turn signal lamp in outside mirror: Turn signal lamp in outside mirror on driver's side. "L131", turn signal lamp in the outside mirror on the front side. passage. "L132".
5. Bolt: 0.9 Nm.
Dismantling
Remove the mirror glass. Unscrew bolts "4" and "5". Unlock clamp "2" and remove housing "3" of the outside rearview mirror. view from the overlay "1" "arrows".
On vehicles with lane change assist, housing "1" of the outside rear mirror. release it so that the plug connector is visible. Disconnect the "2" connector of the lane departure warning light from the front. parts of the mirror adjuster fastening "3".
Pull the housing "2" of the outside rear mirror. view upward and disconnect plug connector "3". Unscrew bolts "1" and "4". Remove housing "5" of the turn signal lamp from the housing of the outside mirror "arrow".
Installation
Installation in reverse order. If the LED is damaged, the turn signal in the outside mirror must be completely replaced. Insert the side ledge. direction indicator "3" into the groove on the housing "4" of the outside rear mirror. "arrow" type. Insert housing "2" of the turn signal lamp into the housing of the outside rearview mirror. type, while the guide groove must be fixed in the guide "1".
Install the outside mirror housing.
(This publication is borrowed from the resource: audimanual.ru)