Attention. When the repeater is removed, it moves forward against the action of the plastic spring. If the repeater is not moved forward, then it is installed the other way around. This means that the plastic spring is located at the rear, and in order to remove the turn signal repeater, it must be moved towards the rear of the car.
Remove the bulb socket from the side repeater.
Remove the defective lamp from the socket and insert a new lamp into the socket.
Insert the cartridge into the side repeater guides until it locks into place.
First, insert the side turn signal with both slots into the rear part of the opening of the body and then push it until it is completely fixed.
Visitor comments