High beam headlight bulb (Audi A6 C5)

To access the right headlight bulb, remove the air intake B (fig. 14.28). To do this, unscrew the two screws A (Fig. 14.1) securing the air intake. Pull up the rear part of the air intake B and move it toward the center of the car.



Release the two wire clips and remove the cover from the back of the headlight.

Disconnect electrical connector 1 (fig. 14.30) from the headlight bulb



Compress the spring clips 2 (fig. 14.30) lamp mounts and move the brackets to the side.

Remove the bulb from the headlight.

When installing, do not touch the glass bulb of the lamp with your hands.

Install the new bulb so that the flange protrusion fits into the recess in the headlight reflector.

Secure the lamp with the spring clip by snapping it into place.

Connect the electrical connector to the lamp.

Place the cover on the headlight and secure it with wire clips.

(The article was copied from the website: AUDIMANUAL.ru)