To access the right headlight bulb, remove air intake B (pic. 14.28). To do this, unscrew the two screws A (pic. 14.28) air intake mounts. Pull up the rear of air intake B and move it towards the center of the vehicle.
Release the two wire clips and remove the cover from the back of the headlight.
Remove from the lower part of the reflector the cartridge with the lamp of the front position light 1 (pic. 14.31), for which turn the lamp socket counterclockwise. It is not necessary to disconnect the electrical connectors from the cartridge.
Pull the bulb out of the socket.
Insert a new incandescent bulb into the socket.
Insert the bulb socket into the reflector and turn it clockwise until it stops.
Install the cover on the headlight and secure it with wire clamps.
Visitor comments