Table of contents: Removal the turn signal lamp in the… ↓ Installation ↓
Direction indicator in the outside mirror 1. Mirror; 2. Mounting the mirror position regulator; 3. Outside mirror housing; 4. Turn signal lamp in outside mirror: Turn signal lamp in outside mirror on driver's side "L131"; turn signal lamp in the outside mirror on the front passenger side "L132"; 5. Bolt 0.9 Nm
Removal the turn signal lamp in the outside mirror "L131" / "L132"
Switch off ignition. Remove outside mirror "1". Pull housing "2" of the outside mirror in the direction of "arrow A" so that the cover latches come out. Unlock latches "1" on the left and right "arrow B" using hook "3438" and remove the outside mirror housing from the cover.
I
Press the mirror adjuster down and do not fully lift the housing "2" of the outside rearview mirror. If equipped, disconnect the connector of the lane change assist indicator light on the front side of the mirror adjustment unit mount. Disconnect connector "1" and remove the outside mirror housing.
Unscrew bolt "2". Remove housing "3" of the turn signal lamp from housing "1" of the outside mirror "arrow B", slightly turning the housing of the turn signal lamp from the guide "arrow A".
Installation
Installation in reverse order: if the LED is damaged, the turn signal in the outside mirror must be completely replaced. Insert the tip of the side turn signal repeater into the groove on the housing "1" of the outside mirror "arrow". Insert the housing "3" of the turn signal lamp into the housing of the outside rear-view mirror, while the guide groove must be fixed in the guide "2".
Install the outside mirror.
The article was copied from the website AudiManual