Direction indicator in the outside mirror.
1. Mirror.
2. Mounting the mirror position regulator.
3. Outside mirror housing.
4. Turn signal lamp in outside mirror: Turn signal lamp in outside mirror on driver's side. "L131", turn signal lamp in the outside mirror on the front side. passage. "L132".
5. Bolt: 0.9 Nm.
Dismantling
Remove the mirror glass. Unscrew bolts "4" and "5". Unlock retaining tabs "3" in the direction of arrow A. Unlock clamp "1" and remove housing "2" of the outside rearview mirror. view from the "arrow B" cladding.
Press the mirror adjuster down and do not fully lift the housing "1" of the outside rear mirror. type. If equipped, disconnect connector "2" of the lane change assist warning light on the front. side of the "3" block per. mirrors.
Pull the outside rearview mirror housing. view upward and disconnect connector "3". Unscrew bolts "1" and "4". Remove housing "2" of the turn signal lamp from the housing of the outside mirror "arrow".
Installation
Installation in reverse order. If the LED is damaged, the turn signal in the outside mirror must be completely replaced. Insert the tip sideways. turn signal repeater into the groove on the housing "3" of the outside mirror "arrow A". Insert the housing "4" of the turn signal lamp into the housing of the outside rearview mirror. "arrow B" type, while the locking protrusion "2" should be fixed in the fastening "1". Install the outside mirror housing.
