Table of contents: Fog lights - vehicles before model… ↓ Replacing the fog light bulb… ↓
Fog lights - vehicles before model year 2012
1. Air intake grille.
2/6. Bolt: 4.5 Nm.
3. Fog light bulb: left fog light bulb "L22", right fog light bulb "L23"; 12 V. 55 W (H11).
4. Electrical plug connection.
5. Fog light.
Dismantling
Turn off the ignition. Set the light switch to position 0. Unlock the "arrow A" latches using a screwdriver. Remove the air intake grille "1" from the bumper trim "arrow B".
Remove bolts "1" and "2". Remove the fog light housing "3" from the bumper cover, while disengaging the fastening latch "arrow" from the mount. Disconnect the plug connection.
Installation in reverse order. Adjusting fog lights.
Replacing the fog light bulb "L22"/"L23"
Release the front fender liner. wheel arch. Disconnect the plug connection "1" of the bulb. Disconnect the ventilation hose "3" on the left fog light. Turn the bulb "2" counterclockwise "arrow" and remove it from the fog light housing.
Installation in reverse order. Insert the new lamp into the housing, being careful not to touch the glass bulb of the lamp with your bare hands. Secure the lamp by screwing it in clockwise. Attach the ventilation hose to the left fog light. Install the front wheel arch liner.
(This article was copied from an online resource: audimanual)