2. If there are no color marks on the drive shaft and on the rear differential flange (see illustration 2.4), apply them with a felt-tip pen.
3. Unscrew the fasteners of the propeller shaft to the rear differential (see Section 2), separate the shaft from the differential and hang the shaft on the clamp (see illustration).
3.3. Fastening the cardan shaft
4. Remove the left and right skid plates from the rear differential (see illustration).
3.4. Rear differential skid plate fastener
5. Support the rear differential with a transmission jack and securely fasten the differential to the jack. Remove the differential support mounting bolts (see illustration).
3.5. Rear differential support fasteners
6. Remove the bolts (A and B in the illustration) rear differential mounts on the subframe.
Note: Bolt (A) remains in the subframe.
3.6. Rear differential mount on subframe
7. Lower the rear differential slightly, turn it to the side one by one and pull out the drive shafts. Then lower the rear differential completely.
8. Installation is carried out in the reverse order of dismantling the components.