2. Place the car on a horizontal surface, securely tighten the handbrake. To securely fix the car, place supports under the wheels.
3. Start the engine and let it idle. Press the brake pedal and carefully move the selector from position P to position 1, then back to P.
5-speed automatic transmission 01V
1. Unscrew the filler plug (arrow on the accompanying illustration).
2. Check the oil level. The oil level should reach the lower edge of the filler hole.
3. Tighten the filler plug (arrow) to 30 Nm, installing a new sealing ring.
4. Unscrew the filler plug on the left side of the gearbox (arrow on the accompanying illustration).
5. Check the oil level. The oil level is at the required level if it is 8.5 mm below the filler hole.
6. Tighten the filler plug to 20 Nm.
Warning: There may be a sticker on the rear hood with the oil change date and marking. Update the sticker or make a new one.
Warning: If the oil level is too low, check the gearbox for leaks and repair if necessary (work of the service station). It is not enough to just pour oil into the gearbox. It is necessary to monitor its correct level! In no case should you pour too much oil.
7. Reinstall the lower engine compartment cover, refer to Section Removal and installation the upper engine cover/lower engine compartment protection/subframe.
8. Lower the car onto its wheels.