Withdrawal
1. Disconnect the negative cable (-) battery.
Warning: Follow the instructions in Section Replacing the battery.
2. Remove the right side trim in the trunk, refer to Sections Removal and installation of facings (Sedan) And Removal and installation of facings (station wagon).
3. Disconnect the connector.
4. Remove the bolts using the special tool AUDI T10010 (arrows on the accompanying illustration), slide the adjuster forward and remove it.
Installation
1. Move the emergency lock (3) above the locking pin of the adjusting element.
2. Install the adjuster so that the locking pin fits into the closed fuel tank cap (2). Move the adjusting element back and tighten the mounting bolts.
3. Dock the connector and install the side trim in the trunk, refer to Sections Removal and installation of facings (Sedan) And Removal and installation of facings (station wagon).
4. Connect the negative cable (-) battery.
Warning: Follow the instructions in Section Replacing the battery.
Visitor comments