Check your power steering fluid level regularly
1. If the hydraulic oil is cold, do not start the engine, set the wheels straight.
2. Unscrew the lid from the tank.
The power steering fluid reservoir is located to the left in front of the anti-lock brake system control unit
3. Wipe the dipstick built into the cap with a clean cloth and screw the cap back on by hand. The oil level can only be measured correctly if the crumb is screwed into the tank before measuring.
4. When the engine is cold, the oil level should be near the minimum mark (a deviation of 2 mm in either direction is allowed). When the engine is warm (starting at approximately 50'C), the oil should be between the minimum and maximum marks.
5. If the oil level is too high, it must be sucked out. If the level is too low, check the tightness of the system, since in this case, adding oil alone is not enough.
6. Drained hydraulic oil should not be reused.